Monday, 19 May 2014


For the better part of five decades, commercial access to space has been limited by the high cost of flight operations. However, Space Exploration Technologies Corp. (SpaceX) has rewritten the rules by adopting a new business model and cutting-edge technologies to enhance reliability and reduce the cost of space access.

SpaceX’s Falcon Heavy (currently under development) will be the world’s most powerful rocket, with three Falcon 9 cores and more than twice the payload-to-orbit capacity of the space shuttle, but at only one-third the cost. It is expected to be the first rocket to break the $1,000-per-pound-to-orbit barrier, less than a tenth as much as the NASA space shuttle.

Adopting Advanced Composite Materials

One significant way SpaceX decided to enhance the performance of its Falcon rocket and Dragon capsule was by adopting advanced composite materials. As composites have received growing acceptance in a variety of industries, including aerospace, the space industry has taken note. SpaceX was no exception. It recognized that composites could significantly enhance performance by improving the strength-to-weight ratio of the materials used to construct its spacecraft.

Fibersim Proves Invaluable

Once that decision was made, SpaceX conducted an evaluation of available composites engineering solutions and decided that Siemens PLM Software’s Fibersim software was the best fit for its design and manufacturing environment.

“Based on our comparison, there was no question that Fibersim was definitely the best choice on the market for designing and manufacturing composite components to suit our needs,” says Kirk Matthes, SpaceX’s design manager.

SpaceX’s business model is derived from the philosophy that simplicity, low cost, and reliability can go hand in hand. By eliminating the traditional layers of management and subcontractors, the company has reduced costs while speeding decision making and delivery. Likewise, by keeping the vast majority of manufacturing in-house, SpaceX reduced costs, kept tighter control of quality, and ensured a tight feedback loop between the design and manufacturing teams. And by concentrating on simple, proven designs with a primary focus on reliability, the company has reduced the costs associated with complex systems operating at the margin. Fibersim has proved invaluable within that paradigm.

“Time is always of the essence for us, so Fibersim’s proven ability to take us from art to part so rapidly was a critical consideration in our decision to purchase the software,” says Chris Thompson, vice president of structures engineering for SpaceX. “But it is about more than just speed. Fibersim improves product quality by providing accurate engineering information to the manufacturing floor, which also helps the repeatability of the manufacturing process. This ensures that parts fit when they come off the tool.”

Working In Parallel

SpaceX has used Fibersim to design and manufacture a variety of composite parts on both the Falcon rocket and the Dragon capsule. Fibersim is being used to develop production fiber placement diagrams and laser projection files. It is also used to assist with actual fiber placement for the spacecraft’s thermal protection system, including the heat shield, exterior panels, insulating layers on the rocket and spacecraft, and several panels around the nose cone and engines.

Fibersim is now being employed from the outset on all new composites projects and has enabled SpaceX to reduce the design-to-manufacturing time on composite parts, such as the 5-m fairing boat tail panel, by 71 percent (from seven days to two days). For other designs, the generation of manufacturing data was reduced by 86 percent (from seven days to one day) with Fibersim. These dramatic time savings mean that changes are processed more quickly, designs are updated more reliably, and the overall process flows more smoothly.

SpaceX has used Fibersim to perform a variety of tasks, including creating designs, such as making flat patterns and working in conjunction with its finite element analysis (FEA) software, and to create laser data.

“Fibersim enables us to work in parallel between design and manufacturing, which is very important to us since we're such a fast-paced organization,” says Derek Lies, structural designer for composite panels used on the Dragon capsule. “It definitely helped improve the collaboration between design and manufacturing. And we also found that Fibersim very nicely captured the vocabulary of composites and provided an intuitive workflow, which enables our people who aren't trained in composites to get up and running very quickly.”

Providing Strong Support

As a newcomer to composites, SpaceX was also concerned about finding a software vendor that had significant composites experience so it could receive the necessary guidance and support as it embarked on working with new materials.

“Siemens PLM Software’s support is excellent,” says Matthes. “In fact, it is the best support I've ever seen. Anytime we have a problem, we can send a model to the Siemens PLM Software’s technical consultant, and he helps us get through the issue. Again, as a fast-paced organization, we must continually be moving forward, and Siemens PLM Software’s responsiveness and expertise enables us to do just that.”

Speeding Ply Definitions

Since most of the composite parts are not especially complicated, the Composite Engineering Environment (CEE) module in the Fibersim portfolio has proven to be sufficient. However, certain sections of the launch vehicle are characterized by complex curvature, so SpaceX opted for the Advanced Composite Engineering Environment (ACEE) module in the Fibersim portfolio to design those parts. The ACEE exploits the inherent advantages of many different composite design methodologies—including structure-based, zone-based, and ply-based design—to enable efficient engineering of large, complex structural components and highly contoured composite skins.

Most important, it helps to address the changes that inevitably occur while developing a composite structure. Based on inputs from analysis, manufacturing, or further iterations of the design, the definition evolves to its final state. This can require frequent updates and changes, which are time-consuming without software created specifically for this process. The ACEE is designed to meet this challenge and create a more straightforward process for managing design changes.

“The ACEE provided a significant boost to our efforts to define or import laminate specifications and requirements quickly using a zone-based design methodology,” explains Matthes. “It helped speed ply definition by dynamically generating zone transitions and ply boundaries using an offset profile.”

The ability to accelerate the process and make it more accurate enables SpaceX to proceed with heretofore unheard of speed and quality, setting new standards for designing and manufacturing composite spacecraft.

Sources: SpaceX, Siemens, Quality Insider.

No comments: